2.0L / 2.6L (SOHC) Starion / Conquest Stand Alone ecu: plug-n-play

LIMITATIONS (please read and acknowledge above)
All parts are sold for OFF ROAD RACE-ONLY ground-vehicle use only. Aftermarket EFI/EMS systems are not for use on pollution controlled vehicles. Alteration of emission related components constitutes tampering under the US EPA guidelines and can lead to substantial fines and penalties. Your state/district may also have specific rules restricting your tampering with your vehicle's emissions system. In short, as stated before, our official policy has to be RACE or OFFROAD USE-ONLY in ground based vehicles ONLY

This completely Stand Alone ecu will take your SQ with a 2.0L or 2.6L (SOHC) to new levels.  Simply remove the factory ecu and a portion of the factory wire harness, install this ecu and accompanying new wire harness and dial in your factory TBI system or convert to an MPI intake manifold for maximum power. 

Each system comes with a base tune pre-loaded to help you get up and running quickly.  The ecu also features "Auto Tune" so you can drive around town and really dial the system in.  For absolute maximum engine HP, we always recommend putting the car on a dyno and letting a tuner squeak out the most power safely.

This ecu is compatible with all your factory gauges except the turbo boost gauge - keep the factory look (the factory boost gauge should be updated to something accurate though by using an Apillar mount or our radio panel mount with 52mm gauge holes)

No more overly rich or lean conditions to worry about.  This package has a data logging feature so you can capture your runs and review them for needed changes.  

All Tuning is done thru Tuner Studio Ultra software:

http://www.tunerstudio.com/index.php/tuner-studio/tsarticles/119-tunerstudio-30-feature-matrix

See the install results video here:

https://vimeo.com/manage/videos/877784350